IPC Eagle 24 inch Auto Scrubber Grit Impregnated Stripping Brushes
- Fits the IPC Eagle 24” battery scrubber
- Two 12" brushes required
- Good for heavy duty scrubbing
- May harm tiled surfaces
These 12 inch brushes are designed to be used with the 24" line of IPC Eagle auto scrubbers, which are the CT70 walk behind, and the CT 80 ride on models. Each brush itself is 12 inches diameter, so there are 2 required for each model. The bristles on these brushes are impregnated with grit for heavy duty scrubbing of grout lines, and stripping of commercially tiled floors. Use on an inconspicuous area of flooring before scrubbing your complete floor, to test for quality of floor finish.
For additional options, including scrub brushes for light duty and everyday cleaning, take a look at our complete line of automatic floor scrubber brushes.
Unfortunately, this auto scrubber has been discontinued by the manufacturer.Please take a look at our full line of IPC Eagle walk behind auto scrub...View full details
Unfortunately, this floor finish remover has been discontinued by the manufacturer as of 12/1/21. Please take a look at our full line of floor str...View full details
These 12 inch pad holders attach directly to the bottom of the line of IPC Eagle 24 inch auto scrubbers (rider & walk behind). Each pad driver ...View full details
These brushes are made to be used with the IPC Eagle CT70 auto scrubber, and 2 are required. They are also used on the CT80 rider scrubber scrubbe...View full details
This red rubber replacement squeegee blade can be used on most 20" & 24" IPC Eagle auto scrubbers. Please see below for a full listing of prese...View full details
This rear replacement squeegee blade can be used in 4 different directions before replacement. Use the front side of the squeegee until it wears do...View full details