Clarke® Front Squeegee Blade for CA30™ 17 inch Auto Scrubbers
- Fits the Clarke® CA30™ 17E auto scrubber
- Each rubber blade can be used on all 4 sides
- Easy to rotate and replace
- Front squeegee blade
This front replacement squeegee blade is designed to fit the Clarke CA30 17E Electric Auto Scrubber. The channel notches allow solution to be directed to the suction opening and the solid rear squeegee blade, keeps the floor scrubbing solution, or your floor degreasing solution in the suction path to help dry your floor completely. Degreasing solution will work best for those really heavily soiled floors. Using a defoamer when using a degreasing solution will help to protect, and prolong the life of your vacuum motors by breaking down foam before it fills the recovery tank.
Both the front and rear squeegee blades can be used on all four sides for recovery of dirty solutions. You can use the front side of the squeegee, then rotate, so the back side is facing forward. Then, you can flip it upside down, and use both of those surfaces. No tools are required to switch your blades, making rotation extremely easy and allowing you to do that fairly frequently. Rotating your squeegees every 20 hours of scrubbing is recommended, as it helps them to wear evenly and last longer.
With the Clarke CA30 17E, you can experience the agility of a 17 inch wide auto scrubber and the added convenience of a 65 foot safety yellow power...View full details
This rear replacement squeegee blade is designed to fit the Clarke CA30 17E Electric Auto Scrubber. The rubber blade is paired with the front recov...View full details
This 17 inch replacement pad holder is used with the Clarke CA30 17E electric auto scrubber. A pad driver is made to replace the brush that comes s...View full details
This 17 inch floor scrubbing brush is used on the Clarke CA30 17E auto scrubber and is for use in place of the standard pad driver and pads. This b...View full details