Black Neoprene Front Squeegee for Viper Fang 28T Auto Scrubber
- For use with Viper Fang 28T
- Each blade can be used on 2 sides
- This is the front squeegee
- Black, neoprene
This is the front replacement squeegee for the Viper Fang 28T-195 in black neoprene, a slightly more economical option than the blue polyurethane. Be aware that the Viper Fang autoscrubbers require TWO replacement squeegee on the back of the machine. These are of different design, so make sure to order the correct one-- this listing is for the FRONT of the pair.
Take a look at our complete line of auto scrubber squeegees for additional sizes and colors.
Unfortunately, this floor scrubber has been discontinued by the manufacturer as of 12/1/2020. Check out our Viper walk behind auto scrubber area fo...View full details
These 14 inch red floor scrubbing pads are generally used with 28 inch walk behind or ride on automatic floor scrubbers, and smaller floor buffers....View full details
The Viper Fang 28T requires 2 separate squeegees on the back of the machine in order to vacuum up solution as you pass along the floor. The back an...View full details
If you are looking to replace the squeegees on your Viper 28T autoscrubber, you may want to consider blue polyurethane for your smooth tile or conc...View full details
This neoprene squeegee is a bit more economical option than the blue polyurethane for your Viper autoscrubber. This one is the rear replacement squ...View full details