Product Description
This Trusted Clean 'Quench' wet/dry vacuum is perfect for recovering water, stripping solution, and many other liquids. It is the ultimate tool when paired with an auto scrubber for maximum recovery and efficiency.
After stripping large areas, you typically flood an area to reduce the pH level. This vac comes standard in our floor stripping recovery package, which is included for this exact reason. After you're done stripping the floor, you then suck everything up, including the slurry with this vac. After that, you flood the floor with normal water and then remove that solution.
This Trusted Clean floor washing recovery vacuum is the ultimate accessory tool when used in tandem with an auto scrubber or a floor buffer.
Starter Packages
Quick Overview
- 18 gallon wet/dry vac
- 1.17 HP vacuum motor
- 5 piece toolkit included
Tips from our SuperFreak Service Technicians
Tim C says - "You need to use a defoamer whenever you're recovering liquids with this vacuum. This is especially true for anyone stripping floors and recovering any type of slurry solution. If you don’t use a defoamer, we have seen the seal plate on the end of the ball float get so hot that it starts to melt and welds itself to the bottom of the vac motor assembly. This does not allow the seal plate to drop back down when the recovery tank is emptied, causing a blockage and total loss of suction. To replace the seal plate, you must disassemble the entire vacuum, which voids the warranty. So, again just to reiterate what I said before, we always recommend using a defoaming product in every type of water recovery scenario with this vacuum."
Maintenance Tips
- Use defoamer with each use, either by pouring directly into the recovery tank or by sucking a few ounces up through the front mount squeegee or through the handheld tools.
- Before & after each use, make sure the ball float is moving freely.
- Wipe down the squeegee blades after each use to avoid build up and remove any chemicals still on the blades. Many chemicals if left on a squeegee can cause warping or deterioration.
- Empty out & clean the machine after each use.