CleanFreak® Oscillating Orbital Floor Machine (14" x 20" Head) - 3500 RPM
- 14" x 20" orbital style scrub head
- Can be used wet or dry
- Weighs 111 lbs. (additional weights can be added)
- 5 year warranty on the motor & gearbox
Introducing the CleanFreak 14" x 20" orbital floor machine - the ultimate solution for all your floor stripping needs (wet or dry). This unit is perfect for any top coat prep where you dry strip or sand down the top layer of finish to recoat. This is interim maintenance to extend time between complete wet floor strippings. In addition to its stripping capabilities, the CleanFreak can also be used for sand screening gym floors with the appropriate sand screens.
Featuring a a comfortable user experience during operation (handle has been designed for minimal vibration), this CleanFreak machine is different than the typical 14" x 20" oscillating floor machines you've seen before. The cast iron deck provides ample down pressure to tackle any job. Additional weights can be purchased to increase the overall down pressure being applied to the floor. The 1.5 HP motor is designed to run at lower voltages, making it suitable for use in older buildings with outdated electrical systems.
In addition to its impressive features, the CleanFreak floor machine comes at an unbeatable price. Optional accessories, such as the dust control kit, additional 22-pound weights, and a replacement isolators kit, are also available for purchase. The machine is built to handle two additional weights on the deck but can be modified with longer bolts to hold up to four additional weights.
The CleanFreak 14” x 20” machine comes packaged with 1 red spacer pad to be used with extremely thin pads such as Eco-Prep maroon strip pads.
Both front rubber mounts failed on the pad driver. Had to grab a buffer to finish stripping this job. Now we find out how well they stand behind their warranty.
This equipment you notice very early quality and workmanship that went into the design. I feel very confident that this machine is ready for any task I decides to take on. Used only on carpet with the 14" x 20" square scrubber the torque it applied through the pad to the floor was very impressive.
Machine works great
works great on cleaning the floor only thing is I needed to purchase the weight for it
We use a Tennant square scrubber and it’s great. You can too scrub dry or wet. Floors come out even and saves time.
Check out our tutorial
These 20 inch red orbital scrub pads can be used with any rectangular head orbital scrubber, but we recommend using them with the Pacific S-20 Orbi...View full details
These black rectangular floor pads come 5 pads to a case and made for heavy duty wet floor stripping. Perfect for aggressive stripping to remove di...View full details
These maroon chemical free floor finish removal pads are designed to let you strip your floor with or without water. On average it takes 3 to 5 pas...View full details
Melamine floor cleaning pads are rectangular in shape and are used on orbital floor scrubbers. The melamine pads used for cleaning grout lines and ...View full details
These 14" x 20" sanding screens are designed to work with any type of 14" x 20" orbital machine, including both floor buffer and auto scrubber type...View full details
NRS No-Rinse Floor Stripper is a super-concentrated, low odor floor stripping solution. The fast-acting stripping solution will strip existing floo...View full details