This rear replacement squeegee blade fits the Trusted Clean 'Dura 18HD' auto scrubber. It is specifically made for rubber floors, is responsible for wiping the floor clean and leaving it dry to the touch after the squeegee assembly passes over it. The squeegees should be wiped cleaned after each and every use to ensure long life and remove debris to eliminate any possibility of streaking. The polyurethane material offers improved surface contact than rubber squeegees, as well as high cut and tear resistance, and high abrasion resistance, all of which make this squeegee ideal for picking up water on rubber like surfaces.
This blade, along with its counterpart, the front replacement blade, should be rotated regularly (every 20 hours of use or so) to maintain maximum efficiency in dirty solution recovery. Each blade can be used as is, then rotated front to back so the back side is now the leading edge, and then flipped upside down so both of those edges can be used.
We also have the standard rubber front and rear squeegee blades available, if those are specifically what you're looking for.
How to Rotate / Change Out Your Squeegees
Loosen middle 2 wing nuts on squeegee assembly & remove the squeegee assembly from the machine.
Completely remove all 4 wing nuts from the squeegee assembly.
Loosen & remove rear tension bar by sliding the bracket down & removing it completely from the squeegee assembly.
